Requirements of white fused alumina Used with White Polyurethane Polishing Pads in Flat Lapping
Characteristics of White Polyurethane Polishing Pads: These pads feature a medium-hardness polyurethane composition with a porous structure. They offer superior material removal rates compared to damping cloths, while being softer than fixed-abrasive lapping films. They are highly sensitive to large particles, magnetic impurities, and agglomerates, which can easily cause localized scratching.
I. Crystal Structure Requirements for White Fused Alumina
Crystal Phase: Must be α-Al₂O₃ (corundum phase). γ-Al₂O₃ is prohibited (as it is too soft, provides poor cutting performance, and tends to clog the polishing pad).
White Fused Alumina: Characterized by sharp, angular grains and strong self-sharpening properties, ensuring high removal efficiency—ideal for the rapid removal of deep surface scratches or grooves.
II. Particle Size Specifications for Fused Alumina
Standard recommendations: #1500 #2000 #2500 #3000 #4000mesh
D50: Target values must be stable with minimal batch-to-batch variation.
Oversized (coarse) particles are strictly prohibited; the particle size distribution must be narrow.
Classification Process: Hydraulic sedimentation classification, supplemented by precision screening/filtration.
III. Chemical Purity and Impurity Control for White Fused Alumina
Al₂O₃ Content: ≥99.4% for standard grades; ≥99.7% for high-end optical communication grades.
Fe₂O₃ ≤0.03%: High iron content can lead to yellow spots, discoloration, or rust marks on the workpiece.
Na₂O ≤0.25%: High sodium content promotes moisture absorption and agglomeration, causes ionic contamination, and accelerates the aging of the polishing pad material.
Magnetic Impurities: ≤30 ppm.
Control Measures Extraneous impurities such as CaO, MgO, and free silicon.
IV. Morphology and Dispersion Properties of White Fused Alumina Micropowder
1. Particle Morphology: Controllable angularity; excessively sharp or pointed particles are discouraged (as they tend to cause edge chipping and deep scratches).
2. Dispersion: Excellent dispersibility in water with minimal hard agglomeration. Surface modification for hydrophilicity can be applied to slow down slurry sedimentation, prevent pipeline clogging, and avoid blocking the pores of polyurethane polishing pads.
3. pH Value: 7.0–8.2 (neutral to slightly alkaline); non-corrosive to quartz/glass substrates and polyurethane polishing pads.
4. Moisture Content: ≤0.3%; requires moisture-proof packaging, as exposure to moisture leads to agglomeration, rendering the material unusable.
V. Process Compatibility for Fused Alumina Lapping/Grinding
1. Lapping System: Aqueous-based slurries are preferred, supplemented with appropriate dispersing and lubricating agents. Oil-based systems are prone to clogging the pores of polyurethane pads, causing slippage, and reducing material removal rates.
2. Process Objectives: Uniformly remove tool marks from the preceding coarse-grinding stage to create a consistent matte finish. Maintain a stable Ra (surface roughness) value while ensuring a uniform, controllable subsurface damage layer—facilitating subsequent fine polishing with damping cloth. The process must avoid excessive surface damage while ensuring no deep, localized scratches remain.
3. Comparative Note: Compared to green silicon carbide,white fused alumina micropowder offers a gentler cutting action. Under identical conditions, it presents a lower risk of edge chipping and scratching, making it highly suitable for precision optical components such as those featuring V-grooves.
In summary, the core requirements for white fused alumina used in flat lapping with white polyurethane polishing pads include: a narrow particle size distribution, strict control over maximum coarse-particle size, low iron and magnetic impurity content (≤30 ppm), low sodium content, minimal agglomeration with good aqueous dispersibility, and controlled, moderate particle angularity. When paired with an aqueous slurry, it effectively removes coarse-grinding tool marks, preparing the surface for the final fine-polishing stage.
Company Profile
Menu